Product Details:
Type | Oil Level Gauge |
Application | Oil Level Measuring |
Fluid Type | Oil |
Brand | OM |
Material | Stainless Steel |
Glass Material | Acrylic |
Model Name/Number | OLI |
Mounting Orientation | Side |
Process Connection | Screwed |
Scale Material | Acrylic |
Gasket | CAF |
Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. When water contamination is not a problem or when a regular kabir Oil Sight Glass is already installed at the drain port, the Oil Level Indicator can be utilized to monitor oil level. The OLI is a clear acrylic tube with ½” NPT threads at each end. Red and green Buna O-rings are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. It can be installed with the optional breather* at the top ½” NPT port as seen on the kabir Oil Sight Glass and Level Monitor. If the user requires a closed loop, the ½” NPT can be used as a connector port to feed back into the system. Operators can visually monitor the oil for dirt and debris and take appropriate preventive action.
Why use an old style vented oil gauge that is difficult to see through and has breakable glass, when you can install a crystal clear, strong acrylic Esco Oil Level Indicator that offers 360° of oil viewing?
Additional Information:
Product Details:
Usage/Application | Industrial |
Material | Steel |
Brand | Om Industrial Services |
I Deal In | New Only |
Color | Silver |
Origin | India |
Level Indicator (Side Mounted) with Tie Rod design, with Scale OR without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. 1. The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure. 3. As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. 4. It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. 5. We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. 6. It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. 7. It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking. 8. Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel. 9. Offset Constructed Isolation Valve on request. 10. The connection provided will be Flanged / Screwed / TC Joint. | ||||||||||||||||||||||||
| ||||||||||||||||||||||||
|
Product Details:
Type | Oil Level Gauge |
Application | Oil Refineries |
Fluid Type | Oil |
Brand | Om |
Measuring Range | 300 mm |
Material | Stainless Steel |
Glass Material | Acrylic |
Model Name/Number | MOLG |
Mounting Orientation | Side |
Process Connection | Screwed |
Scale Material | Acrylic |
Pressure Type | Low Pressure |
Gasket | CAF |
Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. When water contamination is not a problem or when a regular kabir Oil Sight Glass is already installed at the drain port, the Oil Level Indicator can be utilized to monitor oil level. The OLI is a clear acrylic tube with ½” NPT threads at each end. Red and green Buna O-rings are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. It can be installed with the optional breather* at the top ½” NPT port as seen on the kabir Oil Sight Glass and Level Monitor. If the user requires a closed loop, the ½” NPT can be used as a connector port to feed back into the system. Operators can visually monitor the oil for dirt and debris and take appropriate preventive action.
Why use an old style vented oil gauge that is difficult to see through and has breakable glass, when you can install a crystal clear, strong acrylic Esco Oil Level Indicator that offers 360° of oil viewing?
Model Name/Number | Oil Level Gauge |
Material | Oil Level Gauge |
Brand | OM |
Model | BOLG |
Measuring Range | As per requirement |
Color | Any |
Additional Information:
Product Details:
Type | Magnetic Oil Level Gauge |
Dial Size | 100 mm |
Fluid Type | Oil |
Application | Power Transformer |
Material | Aluminium |
Glass Material | Acrylic |
Dial Calibration | Custom |
Mounting Angle | Vertical |
Mounting Orientation | Top |
Process Connection | Screwed |
Scale Material | Acrylic |
Brand | Om Industrial Services |
Pointer Color | Black |
Additional Information:
Product Details:
I Deal In | New Only |
Color | Blue,Black |
Material | SS,MS,PP,FRP |
Brand | OM |
Model | TLG |
Measuring Range | As per requirement |
Product Details:
Minimum Order Quantity | 1 Number |
Model | FBLG |
Brand | OM, Reputed brands |
Type | Mechanical |
Material | SS, MS, PP, FRP |
Size | As per customer Requirement |
Colour | White Board with Black Marking |
Packaging Type | Wooden |
Magnetic | Float |
Number Of Pieces Per Packet | 1 |
Color | Powder Coating |
Application | Industrial |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Pressure Type | High Pressure |
Glass Material | HARDENED GLASS,KLINGER,MAXCO |
Model Name/Number | RLG |
Gasket | CAF , PTFE , Graphoil |
Operating Temperature | 350oC |
Bolts Nuts | CS/MS,SS |
Accessories | GLOBE VALVE,ETC |
Brand | OM |
Reflex Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.
In this type of level gauge the liquid level is discriminated in the form of different
SPECIFICATIONS :
Type : Reflex / Transparent
Visibility : Full Visibility / Partial Visibility
Liquid Chamber : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
Gasket : CAF , PTFE , Graphoil , Non Asbestose Other On request
Glass : Borosilicate Toughened of Indigenous – Temperature Range upto 150oC , Klinger / Illamdur Make Imported Temperature Range Upto 350oC, Other on request.
· Designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries.
· In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids.
· In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.
· Max. 3000 mm length in single piece.
· Imported/indigenous glasses on request.
· Frost free arrangement on request.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | REFLEX & TRANSPARENT |
Centre Distance | AS PER REQUIREMENT |
Fluid Type | AS PER REQUIREMENT |
Measuring Range | AS PER REQUIREMENT |
Pressure Type | High Pressure |
Drain Connection | AS PER REQUIREMENT |
Vent Connection | AS PER REQUIREMENT |
Usage/Application | Industrial |
Material | CS/MS/SS |
Brand | Om Industrial Services |
Glass | Toughened |
Reflex & transparent level gauges are preferred due to their ruggedness, sturdiness and low initial costs. They are installed to give easy level reading by viewing the position of liquid through tough glass panes.
These transparent level gauges come with a liquid chamber made out of single piece rod and are connected to the side of vessels. One can view the liquid level through heavy duty glasses that are temperature resistant and thermally pre-stressed. These gauges are preferred due to their ruggedness, sturdiness and low initial costs.
In reflex level gauges, the contrast indication inner glass surface has reflecting prisms. The liquid column, in contrast to the reflective surface above appears black. On the other hand, the transparent level gauges have heavy duty transparent glasses that are clamped firmly using nut bolts and steel cover plates. This makes easy to view the liquid clearly.
The mountings of these gauges can be done according to specific preferences. For full visibility, side mounting is most appropriate where the vessel connection is within visible length. For partial visibility, end mounting is suitable with the vessel connection beyond visible length.
Reflex and transparent level gauges can be ordered with special additions as well. These include built-in isolation valves, ball check arrangements, bolted forged or screw bonnets, acrylic or anodized aluminum scales and Mica / KLF protection against high temperature liquids. You can also opt for non-frost extensions, illuminators, built-in anti-solidification heating jackets and isolation valves.
Reflex level gauges are in great demand for a number of purposes. They are used in condensate tanks, boilers, pressure vessels, solvents, coolants, high temperature / pressure liquid storage tanks, lube oil, acids and more.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Type | AS PER REQUIREMENT |
Fluid Type | ALL |
Material | AS PER REQUIREMENT |
Measuring Range | 0 - 10 bar or as customer requirements |
Brand | OM |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Centre Distance | AS PER REQUIREMENT |
Type | ALL |
Fluid Type | AS PER REQUIREMENT |
Application | ALL |
Material | AS PER REQUIREMENT |
Brand | OM |
Model | BOLG |
Measuring Range | AS PER REQUIREMENT |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Type | FLOAT & BOARD SCALE TYPE |
Tank Height | 1,2,3,4,5,...............25 MTR |
Float Size | 300 mm |
Accuracy | -+ 5 mm |
Material | Stainless Steel |
Construction Type | Unguided |
Fluid Type | ALL |
Measuring Range | As per requirement |
Model | MS,PP & SS |
Brand | OM |
Float Indicator are used for fluid level measurement in several industries. The Float which is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
Features:
Specifications:
Other details:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Model Name/Number | Float And Board Level Indicator |
Brand | OM |
Type | Mechanical |
Material | Float And Board Level Indicator |
Application | Industrial, Laboratory |
Packaging Type | standard |
Float and Board Types Level Indicators are used for fluid level measurement in several industries.
Features:
Specifications:
Other details:
Product Details:
Minimum Order Quantity | 1 Number |
Type | AS PER REQUIREMENT |
Tank Height | AS PER REQUIREMENT |
Float Size | 300 mm |
Accuracy | -+ 5 mm |
Measuring Range | AS PER REQUIREMENT |
Construction Type | Guided |
Material | Stainless Steel |
Fluid Type | ALL |
Brand | OM |
Application | AS PER REQUIREMENT, Industrial |
Float and board level indicators are used for fluid level measurements in several industries. The float that is contained within a magnetic level indicator is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
CONSTRUCTION:-
Often A typical float and board level indicator would consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.
These type of float and board level indicators basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank.
APPLICATIONS:-
Most often, the floats and board level indicators find its application in over ground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks.
FEATURES:-
The features of a typical float and board level indicator can be detailed as follows
· It has a dust proof pulley housing
· It comes with an SS bush bearing for a smooth rotation of pulley.
· The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting.
· It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as install.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | AS PER REQUIREMENT |
Tank Height | AS PER REQUIREMENT |
Float Size | 300 mm |
Accuracy | -+ 5 mm |
Material | Stainless Steel |
Construction Type | Unguided |
Fluid Type | ALL |
Measuring Range | 1 mtr to 25 mtr |
Model | FLOAT & BOARD |
Brand | OM |
Float and board level indicators are used for fluid level measurements in several industries. The float that is contained within a magnetic level indicator is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
CONSTRUCTION:-
Often A typical float and board level indicator would consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.
These type of float and board level indicators basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank.
APPLICATIONS:-
Most often, the floats and board level indicators find its application in over ground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks.
FEATURES:-
The features of a typical float and board level indicator can be detailed as follows
· It has a dust proof pulley housing
· It comes with an SS bush bearing for a smooth rotation of pulley.
· The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting.
· It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as install.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Type | FLOAT & BOARD SCALE TYPE |
Tank Height | 1,2,3,4,5,6,7,8,9,10.......25 MTR |
Float Size | 300 mm |
Measuring Range | ALL |
Accuracy | -+ 5 mm |
Material | Stainless Steel |
Construction Type | Unguided |
Fluid Type | ALL |
Brand | OM |
Model | F& B |
Application | Industrial |
Float and board level indicators are used for fluid level measurements in several industries. The float that is contained within a magnetic level indicator is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
CONSTRUCTION:-
Often A typical float and board level indicator would consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.
These type of float and board level indicators basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank.
APPLICATIONS:-
Most often, the floats and board level indicators find its application in over ground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks.
FEATURES:-
The features of a typical float and board level indicator can be detailed as follows
· It has a dust proof pulley housing
· It comes with an SS bush bearing for a smooth rotation of pulley.
· The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting.
· It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as install.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | ALL |
Fluid Type | AS PER REQUIREMENT |
Centre Distance | AS PER REQUIREMENT |
Pressure Type | High Pressure |
Measuring Range | ALL |
Drain Connection | AS PER REQUIREMENT |
Material | AS PER REQUIREMENT |
Vent Connection | AS PER REQUIREMENT |
Model Name/Number | TLG |
Application | tanks, boilers, pressure vessels, solvents, coolants, high temperature / pressure liquid storage tanks, lube oil, acids |
Brand | OM |
The pharmaceutical and petrochemical industry needs the most advanced mechanisms for the success of their operations. This is because they deal with materials that are highly toxic and inflammable, and are used under high pressures and temperatures. The Reflex & Transparent Level Gauge is one mechanism that is extremely suitable for this industry.
Reflex & transparent level gauges are preferred due to their ruggedness, sturdiness and low initial costs. They are installed to give easy level reading by viewing the position of liquid through tough glass panes.
:-
These transparent level gauges come with a liquid chamber made out of single piece rod and are connected to the side of vessels. One can view the liquid level through heavy duty glasses that are temperature resistant and thermally pre-stressed. These gauges are preferred due to their ruggedness, sturdiness and low initial costs.
:-
In reflex level gauges, the contrast indication inner glass surface has reflecting prisms. The liquid column, in contrast to the reflective surface above appears black. On the other hand, the transparent level gauges have heavy duty transparent glasses that are clamped firmly using nut bolts and steel cover plates. This makes easy to view the liquid clearly.
The mountings of these gauges can be done according to specific preferences. For full visibility, side mounting is most appropriate where the vessel connection is within visible length. For partial visibility, end mounting is suitable with the vessel connection beyond visible length.
Reflex and transparent level gauges can be ordered with special additions as well. These include built-in isolation valves, ball check arrangements, bolted forged or screw bonnets, acrylic or anodized aluminum scales and Mica / KLF protection against high temperature liquids. You can also opt for non-frost extensions, illuminators, built-in anti-solidification heating jackets and isolation valves.
Reflex level gauges are in great demand for a number of purposes. They are used in condensate tanks, boilers, pressure vessels, solvents, coolants, high temperature / pressure liquid storage tanks, lube oil, acids and more.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | Transparent Level Gauge |
Brand | Om Industrial Services |
Pressure Type | High Pressure |
Material | Copper |
Glass | Toughened |
The pharmaceutical and petrochemical industry needs the most advanced mechanisms for the success of their operations. This is because they deal with materials that are highly toxic and inflammable, and are used under high pressures and temperatures. The Reflex & Transparent Level Gauge is one mechanism that is extremely suitable for this industry.
Reflex & transparent level gauges are preferred due to their ruggedness, sturdiness and low initial costs. They are installed to give easy level reading by viewing the position of liquid through tough glass panes.
:-
These transparent level gauges come with a liquid chamber made out of single piece rod and are connected to the side of vessels. One can view the liquid level through heavy duty glasses that are temperature resistant and thermally pre-stressed. These gauges are preferred due to their ruggedness, sturdiness and low initial costs.
:-
In reflex level gauges, the contrast indication inner glass surface has reflecting prisms. The liquid column, in contrast to the reflective surface above appears black. On the other hand, the transparent level gauges have heavy duty transparent glasses that are clamped firmly using nut bolts and steel cover plates. This makes easy to view the liquid clearly.
The mountings of these gauges can be done according to specific preferences. For full visibility, side mounting is most appropriate where the vessel connection is within visible length. For partial visibility, end mounting is suitable with the vessel connection beyond visible length.
Reflex and transparent level gauges can be ordered with special additions as well. These include built-in isolation valves, ball check arrangements, bolted forged or screw bonnets, acrylic or anodized aluminum scales and Mica / KLF protection against high temperature liquids. You can also opt for non-frost extensions, illuminators, built-in anti-solidification heating jackets and isolation valves.
Reflex level gauges are in great demand for a number of purposes. They are used in condensate tanks, boilers, pressure vessels, solvents, coolants, high temperature / pressure liquid storage tanks, lube oil, acids and more.
Product Details:
Minimum Order Quantity | 1 Piece |
Type | ALL |
Fluid Type | AS PER REQUIREMENT |
Centre Distance | AS PER REQUIREMENT |
Pressure Type | High Pressure |
Measuring Range | AS PER REQUIREMENT |
Material | AS PER REQUIREMENT |
Drain Connection | AS PER REQUIREMENT |
Vent Connection | AS PER REQUIREMENT |
Application | ALL |
Brand | OM |
IBR Level Gauge to our experience and skills in this sector, we have been successfully engaged in manufacturing & supplying Reflex Level Indicator. These level indicators are tested by our quality analyst to ensure their high strength, sturdiness and rust resistant surface. Our offered range of level indicators find wide application in petrochemical industry, power plants and pharmaceutical industries. Reflex Level Indicator is manufactured in compliance with the set standards & norms of the industry.
Further Details:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | Level Gauge |
Fluid Type | ALL |
Material | Stainless Steel |
Brand | OM |
Model | FLOAT & BOARD LEVEL GAUGE |
Measuring Range | 1 to 25 meter |
Product Details:
Minimum Order Quantity | 1 Number |
Measuring Range | 1 MTR TO 20 MTR |
Brand | OM |
Model | FLOAT & BOARD LEVEL GAUGE |
Storage Tank level Gauge
Float and board level indicators are used for fluid level measurements in several industries. The float that is contained within a magnetic level indicator is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
CONSTRUCTION:-
Often A typical float and board level indicator would consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.
These type of float and board level indicators basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank.
APPLICATIONS:-
Most often, the floats and board level indicators find its application in over ground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks.
FEATURES:-
The features of a typical float and board level indicator can be detailed as follows
It has a dust proof pulley housing
It comes with an SS bush bearing for a smooth rotation of pulley.
The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting.
It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as installAdditional Information:
Product Details:
Model Name/Number | Om Industrial Services |
Brand | Om Industrial Services |
Material | Steel |
Usage/Application | Industrial |
Color | Silver |
Display Type | Analog |
Glass | Toghened |
Tubular Level Indicator (Side Mounted) with Tie Rod design, with Scale OR without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. 1. The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure. 3. As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. 4. It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. 5. We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. 6. It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. 7. It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking. 8. Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel. 9. Offset Constructed Isolation Valve on request. 10. The connection provided will be Flanged / Screwed / TC Joint. | ||||||||||||||||||||||
| ||||||||||||||||||||||
|
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Model Name/Number | Underground Tank Level Indicator |
Brand | om |
Type | Mechanical |
Material | Underground Tank Level Indicator |
Packaging Type | standard |
Application | Industrial |
Product Details:
Model Name/Number | SMLI |
Measuring Range | As per Customer Requirements |
Brand | OM |
Material | SS, MS, As per Customer Requirements |
Usage/Application | Tank level measurement in Pharma, Water, Cement, Chemical Industries |
Size | As per Customer Requirements |
Accessories | As per Customer Requirements |
Display Type | Mechanical or Digital |
Glass | Toughened, Borosilicate glass |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Type | AS PER REQUIREMENT |
Fluid Type | AS PER REQUIREMENT |
Material | AS PER REQUIREMENT |
Measuring Range | 0 - 1, 0 - 3 mtr, 0 - 5 mtr as per Client requirements |
Model | Level Gauge |
Brand | OM |
Additional Information:
Side mounted magnetic level indicator works simple magnetic principle used to get unique, most reliable & absolutely safe level indicator. It is mainly under used for most dangerous liquids even with under high pressure & high temperature.
The unit consists of all SS 316 parts. With inside of SS main chamber pipe, the SS magnetic float which moves up & down. Accordingly follows liquid variation in the tank.
The Float Magnet is operated by magnetically coupled to the Bicolour red & white outside chamber, which is mounted on front side of the main S.S. pipe.
Material of construction available:
Main chamber pipe : S.S. / P.P.
Float : SS 316 / P.P.
Outside casing pipe : Bicolour red & white magnetic Capsule / roller
Scale : Alluminium black engraved / S.S. / Acrylic
Flange : S.S. / P.P.
Drain : ½” BSP drain valve provided on request
Pressure : 20 Kg/cm2 0r 50 Kg/cm2
Temperature : 130°C
Available Length : Maximum 3.5 meters
Product Details:
Brand | OM |
Model | As per requirement |
Application | Industrial, Laboratory |
Measuring Range | As per requirement |
Tubular Level Indicator (Side Mounted) with Tie Rod design, with Scale OR without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. 1. The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure. 3. As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. 4. It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. 5. We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. 6. It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. 7. It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking. 8. Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel. 9. Offset Constructed Isolation Valve on request. 10. The connection provided will be Flanged / Screwed / TC Joint. | ||||||||||||||||||||||
| ||||||||||||||||||||||
|
Additional Information:
TUBULAR LEVEL GAUGES 1. The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure. 3. As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight. 4. It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler. 5. We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. 6. It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application. 7. It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking. 8. Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel. 9. Offset Constructed Isolation Valve on request. 10. The connection provided will be Flanged / Screwed / TC Joint. | ||||||||||||||||||||||||
| ||||||||||||||||||||||||
|
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Material | Stainless Steel, Mild steel, BRASS |
Condition | New |
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel, Polypropylene |
Operation Mode | Normally Open (NO), Normally Closed (NC) |
Application | Sewage, Submersible |
Product Details:
Minimum Order Quantity | 1 Number |
Mounting Orientation | Side |
Material | Stainless Steel |
Glass Material | Borosilicate |
Application | Chemical Industries |
Process Connection | Flanged |
Magnetic Indicator | Capsule |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Model Name/Number | Om Industrial Services |
Brand | Om Industrial Services |
Material | Steel |
Usage/Application | Industrial |
Color | Silver |
Display Type | Analog |
Glass | Toughened |
Additional Information:
Product Details:
Mounting Orientation | Top |
Brand | Om Industrial Services |
Glass Material | Borosilicate |
Application | Chemical Industries |
Display Type | Glass |
Process Connection | Flanged |
Scale Material | Stainless Steel |
Product Details:
Mounting Orientation | Side |
Material | Stainless Steel |
Glass Material | Borosilicate |
Application | Chemical Industries |
Process Connection | Flanged |
Scale Material | Aluminum |
Float Chamber | Glass |
Side Mounted Magnetic Level Indicator with Transmitter is widely used for measurement of water level and to control the water wastage. Precisely designed, provided indicator is engineered using quality tested components and innovative technology by our adept professionals. Further, our prestigious clients can avail this level indicator from us in several technical specifications at cost effective prices.
Working Principles:
Product Details:
Brand | Om Industrial Services |
Material | Steel |
Accuracy | 0.1mm |
Display Type | Analog |
Size | Standard |
I Deal In | New Only |
Product Details:
Minimum Order Quantity | 1 Number |
Type | Manual, Semi-Automatic, Analog, Automatic |
Float Switch | Yes |
Range | 11-15m, 5-8m, 3-5m, 8-11m, 0-3m |
Feature | Monitoring, Low Temperature Resistant, Semiconductor |
Product Details:
Minimum Order Quantity | 1 Unit |
Measuring Range | AS PER REQUIREMENT |
Brand | OM |
Working Principles:
Additional Information:
Product Details:
Material | SS316, SS304 |
Additional Information:
Product Details:
Usage | Industrial, Laboratory |
Brand | OM |
Side Mounted Magnetic Level Indicator with Transmitter is widely used for measurement of water level and to control the water wastage. Precisely designed, provided indicator is engineered using quality tested components and innovative technology by our adept professionals. Further, our prestigious clients can avail this level indicator from us in several technical specifications at cost effective prices.
Working Principles:
Additional Information: